Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 1181 of 1414

TM 9-2320-365-34-2 NOTE Perform step (5) if backlash reading is less than 0.008 in. (0.203 mm). (5) Loosen adjusting ring (3) on back side of hub body (4) and tighten adjusting ring (5) facing the ring gear (2) to increase backlash. NOTE Perform step (6) if backlash reading is greater than 0.018 in. (0.457 mm). (6) Tighten adjusting ring (3) on back side of hub body (4) and loosen adjusting ring (5) facing the ring gear (2) to decrease backlash. (7) Repeat steps (2) through (6) until backlash is between 0.008-0.018 in. (0.203-0.457 mm). (8) Tighten four screws (6) to 132-169 lb-ft (179-229 N·m). (9) Install two cotter pins (7) in bearing caps (6). WARNING Front differential carrier weighs approximately 350 lbs (159 kgs). Attach a suitable lifting device prior to moving. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (10) requires the aid of an assistant. (10) Remove differential carrier (8) from differential carrier repair stand. End of Task. Change 1 24-19/(24-20 Blank)