TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1164 of 1414
TM 9-2320-365-34-2 24-2 Change 2 Section II. MAINTENANCE PROCEDURE 24-2. REAR AXLE DIFFERENTIAL CARRIER REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Adjustment INITIAL SETUP Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Stand, Differential Carrier, Repair (TM 9-2320- 365-20) Puller Kit, Universal (Item 44, Appendix B) Goggles, Industrial (Item 25, Appendix B) Gloves, Rubber (Item 23, Appendix B) Indicator Dial (Item 30, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Multiplier, Torque (Item 35, Appendix B) Holding Bar, Pinion (TM 9-2320-365-20) Press, Arbor, Hand Operated (Item 41, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Puller Kit, Universal (TM 9-2320-365-20) Caliper Set, Micrometer, Outside (Item 7, Appendix B) Socket, Set, Impact (Item 50, Appendix B) Socket, Socket Wrench (TM 9-2320-365-20) (Item 67, Appendix B) Wrench, Impact, Electric (Item 77, Appendix B) Materials/Parts Sealant, Adhesive (Item 65, Appendix C) Sealant, Adhesive (Item 66, Appendix C) Sealant, Adhesive (Item 67, Appendix C) Adhesive (Item 6, Appendix C) Sealing Compound (Item 70, Appendix C) Sealing Compound (Item 75.2, Appendix C) Oil Lubricating Gear (Item 51, Appendix C) Rag, Wiping (Item 59, Appendix C) Nut, Self-Locking (Item 144, Appendix F) Kit, Seal (Item 263.1, Appendix F) Pin, Cotter (2) (Item 225, Appendix F) Solvent, Dry Cleaning (Item 81, Appendix C) Personnel Required (2) a. Disassembly. (1) Install differential carrier (1) on differential carrier repair stand. WARNING Rear differential carrier weighs appro- ximately 350 lbs (159 kgs). Attach a suitable lifting device prior to moving. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (1) requires the aid of an assistant.