TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 1139 of 1414

TM 9-2320-365-34-2 (23) Position wiring harness (24), gasket (25), and cover plate (26) on transfer case housing (2) with four screws (27). (24) Tighten four screws (27) to 4-6 lb-ft (5-8 N·m). (25) Position pressure relief valve (28), spring (29), and plug (30) in oil pump (31). (26) Tighten plug (30) to 18 lb-ft (24 N·m). (27) Position shim(s) (32) and oil pump (31) on transfer case housing (2) with eight bolts (33). (28) Tighten eight bolts (33) to 44-55 lb-ft (60-75 N·m). NOTE Shim(s) are selected during bearing preload adjustment (para. 22-4.d) to compensate for differences in drive gear end play. The initial shim(s) should have a minimum thickness of 0.076 in. (1.930 mm). (29) Position gasket (34), shim(s) (35), seal washer (36), and idler gear cover (37) on transfer case housing (2) with five bolts (38). (30) Tighten five bolts (38) to 44-55 lb-ft (60-75 N·m). (31) Position shim(s) (39), pressure relief ball (40), and manifold (41) on transfer case housing (2) with eight bolts (42). (32) Tighten eight bolts (42) to 44-55 lb-ft (60-75 N·m) 22-19