TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1137 of 1414
TM 9-2320-365-34-2 (5) Install two orifice plugs (7) and plug (8) in transfer case cover (9). (6) Install preformed packing (10) on plug (11). (7) Install plug (11) in transfer case cover (9). (8) Install preformed packing (12) on plug (13). (9) Install plug (13) in transfer case cover (9). NOTE Place all bearing cups in a freezer for a minimum of one hour prior to installation. (10) Install three bearing cups (14) in transfer case cover (9). (11) Install three bearing cups (15) in transfer case housing (2). CAUTION Bearing cones must be seated against shoulder of gears. Failure to comply may result in damage to equipment. (12) Install two bearing cones (16) on center idler gear (17). (13) Install two bearing cones (18) on upper drive gear (19). (14) Install two bearing cones (20) on lower driven gear (21). 22-17