TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1135 of 1414
TM 9-2320-365-34-2 NOTE Replace any part that fails visual inspection. (2) Inspect upper drive gear (1) for cracks, pitting, scoring, burring, and broken gear teeth. (3) Inspect center idler gear (2) for cracks, pitting, scoring, burring, and broken gear teeth. (4) Inspect lower driven gear (3) for cracks, pitting, scoring, burring, and broken gear teeth. CAUTION Bearing cones and cups must be replaced as a set. Never use an old bearing cone or cup with a new bearing cone or cup. Failure to comply may result in damage to equipment. (5) Inspect six bearing cups (4) for pitting and excessive wear. (6) Inspect six bearing cones (5) for pitting and excessive wear. (7) Inspect transfer case housing (6) for cracks, scoring, and burring. (8) Inspect transfer case cover (7) for cracks, scoring, and burring. 22-15