TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1126 of 1414
TM 9-2320-365-34-2 (22-5 Blank)/22-6 Change 2 22-3. TRANSFER CASE MODULE REPAIR This task covers: a. Disassembly b. Assembly c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transfer case module removed (para 22-2). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Holding Bar, Pinion (TM 9-2320-365-20) Wrench, Impact, Electric (Item 77, Appendix B) Multiplier, Torque (Item 35, Appendix B) Socket Set, Impact (Item 50, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Adapter, Socket Wrench (Item 2, Appendix B) Tools and Special Tools (Cont) Puller Kit, Universal (Item 44, Appendix B) Socket, Socket Wrench (Item 67, Appendix B) Materials/Parts Gasket (Item 34, Appendix F) Gasket (2) (Item 42, Appendix F) Oil, Lubricating (Item 44, Appendix C) Personnel Required (2) a. Disassembly. (1) Position transfer case module (1) with C6 clutch housing (2) facing up. (2) Remove 15 screws (3), two screws (4), C6 clutch housing (2), and gasket (5) from transfer case module (1). Discard gasket. (3) Remove nut (6), washer (7), and yoke (8) from rear output shaft (9).