TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1110 of 1414
TM 9-2320-365-34-2 21-14. C6 CLUTCH HOUSING ASSEMBLY REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transfer case module disassembled (para 22-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Caliper, Vernier (Item 8, Appendix B) Goggles, Industrial (Item 25, Appendix B) Inserter, Bearing and Bushing (TM 9-2320-365-20) Handle, Drive (TM 9-2320-365-20) Inserter and Remover, Spring (TM 9-2320-365-20) Press, Arbor, Hand Operated (Item 41, Appendix B) Tools and Special Tools (Cont) Puller Kit, Mechanical (Item 43, Appendix B) Pliers, Retaining Ring (Item 37, Appendix B) Gloves, Rubber (Item 23, Appendix B) Materials/Parts Oil, Engine Lubricating (Item 43, Appendix C) Rag, Wiping (Item 57, Appendix C) Solvent, Dry Cleaning (Item 79, Appendix C) Sealring (Item 282, Appendix F) Sealring (Item 283, Appendix F) a. Disassembly. WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (1) Remove retaining ring (1) and C6 backing plate (2) from clutch housing (3). (2) Remove C6 drive hub (4) from clutch housing (3). (3) Remove five C6 friction plates (5) and C6 reaction plates (6) from C6 drive hub (4). CAUTION If transmission is prior to S/N 6510072173, C6 thrust bearing must be replaced. Failure to comply may result in damage to equipment. (4) Remove thrust bearing (7) from clutch housing (3). 21-66