TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1103 of 1414
TM 9-2320-365-34-2 21-12. P4 PLANETARY CARRIER ASSEMBLY REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transfer case module disassembled (para 22-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Gloves, Rubber (Item 23, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench, Torque, 0-300 lb-in. (Item 83, Appendix B) Caliper, Vernier (Item 8, Appendix B) Adapter, Socket Wrench, (Item 3, Appendix B) Tools and Special Tools (Cont) Socket Wrench Attachment, Screwdriver (TM 9- 2320-365-20) Materials/Parts Rag, Wiping (Item 59, Appendix C) Grease, Automotive and Artillery (Item 36, Appendix C) Solvent, Dry Cleaning (Item 81, Appendix C) Setscrew (3) (Item 287, Appendix F) a. Disassembly. (1) Remove setscrew (1), spindle (2), pinion gear (3), and two thrust washers (4) from planetary carrier (5). Discard setscrew. (2) Remove 18 roller bearings (6) from pinion gear (3). (3) Perform steps (1) and (2) on remaining two pinion gears. b. Cleaning/Inspection. WARNING Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the flashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C). Failure to comply may result in serious injury or death to personnel. If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical help. If dry cleaning solvent contacts skin or clothes, flush with cold water. If dry cleaning solvent contacts eyes, immediately flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (1) Clean all metal parts with dry cleaning solvent. 21-59