TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1101 of 1414
TM 9-2320-365-34-2 c. Assembly. NOTE Apply lubricating oil to all parts during assembly. (1) Install roller bearing cups (1 and 2) in rear output housing (3). (2) Install roller bearing cone (4) in output housing (3). (3) Install spacer (5), shim(s) (6), roller bearing cone (7), and output shaft (8) in output housing (3). (4) Install oil seal (9) in output housing (3). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (5) Install ring gear (10) on output housing (3) with retaining ring (11). 21-57