TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1098 of 1414
TM 9-2320-365-34-2 21-11. REAR OUTPUT HOUSING REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Bearing Preload Adjustment e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transfer case module disassembled (para 22-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Puller Kit, Universal (Item 44, Appendix B) Indicator, Dial (Item 30, Appendix B) Inserter, Bearing and Bushing (TM 9-2320-365-20) Gloves, Rubber (Item 23, Appendix B) Handle, Drive (TM 9-2320-365-20) Caliper, Vernier (Item 8, Appendix B) Press, Arbor, Hand Operated (Item 41, Appendix B) Tools and Special Tools (Cont) Inserter, Bearing and Bushing (TM 9-2320-365-20) Pliers, Retaining Ring (Item 37, Appendix B) Goggles, Industrial (Item 25, Appendix B) Inserter, Bearing and Bushing (TM 9-2320-365-20) Inserter, Bearing and Bushing (TM 9-2320-365-20) Materials/Parts Rag, Wiping (Item 59, Appendix C) Oil, Lubricating (Item 44, Appendix C) Seal, Plain Encased (Item 265, Appendix F) Solvent, Dry Cleaning (Item 81, Appendix C) a. Disassembly. WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (1) Remove retaining ring (1) and ring gear (2) from output housing (3). 21-54