TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1092 of 1414
TM 9-2320-365-34-2 21-9. P2 PLANETARY CARRIER MODULE REPAIR (CONT) (4) Inspect four spindles (3) for scoring, nicks, cracks, burring, and corrosion. (5) Inspect eight thrust washers (4) for scoring, nicks, cracks, and burring. (6) Measure thickness of eight thrust washers (4), minimum thickness 0.057 in. (1.448 mm). (7) Inspect eight roller bearings (5) for cracked or broken cages, and pitting. (8) Inspect four P2 pinion gears (6) for scoring, pitting, nicks, burring, and missing teeth. (9) Measure inside diameter of bushing (7), maximum inside diameter 1.71 in. (43.43 mm). c. Assembly. (1) Install bushing (1) in P2 planetary carrier (2). (2) Install two sealrings (3) on P2 planetary carrier (2). (3) Install eight thrust washers (4), four roller bearings (5), and pinion gears (6) in P2 planetary carrier (2) with four spindles (7). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (4) Install indexing ring (8) and retaining ring (9) in P2 planetary carrier (2). 21-48