TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1074 of 1414
TM 9-2320-365-34-2 21-5. CONVERTER HOUSING MODULE REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission disassembled (para 21-2). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Puller Set, Universal (Item 44, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Caliper, Vernier (Item 8, Appendix B) Goggles, Industrial (Item 25, Appendix B) Gloves, Rubber (Item 23, Appendix B) Bushing Driver Set (TM 9-2320-365-20) Inserter, Bearing and Bushing (TM 9-2320-365-20) Handle, Drive (TM 9-2320-365-20) Tools and Special Tools (Cont) Press, Arbor, Hand Operated (Item 41, Appendix B) Pliers, Retaining Ring (Item 37, Appendix B) Materials/Parts Rag, Wiping (Item 59, Appendix C) Seal, Plain Encased (Item 264, Appendix F) Sealring (Item 277, Appendix F) Packing, Preformed (Item 177, Appendix F) Gasket (2) (Item 31, Appendix F) Solvent, Dry Cleaning (Item 81, Appendix C) a. Disassembly. (1) Remove 10 bolts (1) from bearing retainer (2). (2) Position two bolts (1) in threaded holes of bearing retainer (2). CAUTION Tighten bolts evenly to remove bearing retainer. Failure to comply may result in damage to equipment. (3) Tighten two bolts (1) on bearing retainer (2). (4) Remove bearing retainer (2) from converter housing (3). (5) Remove two bolts (1) from bearing retainer (2). (6) Remove seal (4) from bearing retainer (2). Discard seal. (7) Remove sealring (5) from bearing retainer (2). Discard sealring. 21-30