TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1072 of 1414
TM 9-2320-365-34-2 21-4. ROTATING CLUTCH MODULE REPAIR (CONT) (18) Install bushing sleeve (20), three sealrings (21), and preformed packing (22) on shaft (23). (19) Install shaft (23) in clutch assembly (13). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (20) Install retaining ring (24) on shaft (23). NOTE Alternately stack clutch disk and intermediate plates. (21) Install six clutch disk (25) and intermediate plates (26) in clutch assembly (13). (22) Install clutch disk (27) in clutch assembly (13). (23) Install retaining ring (28) in clutch assembly (13). (24) Install C1 drive hub (29) in clutch assembly (13). (25) Install thrust bearing (30) in C2 drive hub (31). (26) Install C2 drive hub (31) in clutch assembly (13). (27) Install bushing (32) in spur gear (33). (28) Install spur gear (33) in clutch assembly (13). (29) Install bushing (34) in spur gear (33). 21-28