TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1070 of 1414
TM 9-2320-365-34-2 21-4. ROTATING CLUTCH MODULE REPAIR (CONT) (28) Inspect thrust bearing (17) for scoring and damage. (29) Inspect clutch assembly (18) for scuffing, nicks, and burrs. (30) Measure spline wear on clutch assembly (18), maximum distance between splines 0.015 in. (0.381 mm). (31) Measure bushing (19), maximum inside diameter of bushing is 3.901 in. (9.909 cm). (32) Inspect shaft (20) for cracks, nicks, and scuffing. (33) Measure inside diameter of bushing (21), maximum diameter 0.795 in. (20.193 mm). c. Assembly. NOTE Apply lubricating oil to all parts during assembly. (1) Install bushing (1) in gear (2). (2) Install two seals (3) on gear (2). (3) Install sealring (4) on C2 piston (5). (4) Install sealring (6) on C1 piston (7). (5) Install C1 piston (7) in C2 piston (5). (6) Install C2 piston (5) on gear (2). (7) Install thrust bearing (8) in gear (2). 21-26