TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1064 of 1414
TM 9-2320-365-34-2 21-4. ROTATING CLUTCH MODULE REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission disassembled (para 21-2). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Goggles, Industrial (Item 25, Appendix B) Press, Arbor, Hand Operated (Item 41, Appendix B) Inserter and Remover, Spring (TM 9-2320-365-20) Bushing Driver Set (TM 9-2320-365-20) Handle, Drive (TM 9-2320-365-20) Caliper, Vernier (Item 8, Appendix B) Straight Edge (Item 61, Appendix B) Pliers, Retaining Ring (Item 38, Appendix B) Pliers, Retaining Ring (Item 37, Appendix B) Gloves, Rubber (Item 23, Appendix B) Materials/Parts Packing, Preformed (Item 171, Appendix F) Parts Kit, Seal Replacement (Item 222, Appendix F) Sealring (Item 278, Appendix F) Sealring (Item 277, Appendix F) Sealring (Item 276, Appendix F) Sealring (Item 274, Appendix F) Sealring (Item 275, Appendix F) Rag, Wiping (Item 59, Appendix C) Lubricating Oil, Engine (Item 45, Appendix C) Cloth, Abrasive (Item 23, Appendix C) Solvent, Dry Cleaning (Item 81, Appendix C) a. Disassembly. WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (1) Remove retaining ring (1) from clutch assembly (2). 21-20