TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1048 of 1414
TM 9-2320-365-34-2 Section II. MAINTENANCE PROCEDURES 21-2. TRANSMISSION REPAIR This task covers: a. Disassembly b. Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission mounted on maintenance stand (para 7-5). Transfer case module removed (para 22-2). Scavenge pump assembly removed (para 7-16). Control valve module removed (para 7-10). Torque converter removed (para 7-2). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Pliers, Retaining Ring (Item 37, Appendix B) Suitable container [33 qt (31 L) capacity] Caliper, Vernier (Item 8, Appendix B) Straight Edge (Item 61, Appendix B) Caliper Set, Micrometer, Outside (Item 7, Appendix B) Indicator, Dial (Item 30, Appendix B) Tools and Special Tools (Cont) Caliper, Micrometer, Inside (Item 6, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Gage, Profile (TM 9-2320-365-20) Materials/Parts Gasket (Item 32, Appendix F) Gasket (Item 37, Appendix F) Gasket (Item 38, Appendix F) Lubricating Oil, Engine (Item 44, Appendix C) Cloth, Abrasive (Item 23, Appendix C) Personnel Required (2) a. Disassembly NOTE Perform step (1) if transmission is equipped with PTO cover. (1) Remove 10 bolts (1), PTO cover (2) and gasket (3) from torque converter housing (4). Discard gasket. 21-2