TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1044 of 1414
TM 9-2320-365-34-2 20-8. FRONT GEAR HOUSING AND IDLER GEAR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Camshaft removed (para 20-7). Oil pan removed (para 3-16). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Materials/Parts Sealing Compound (Item 75, Appendix C) Personnel Required (2) a. Removal. (1) Remove eight bolts (1) and washers (2) from front gear housing (3). (2) Remove five bolts (4) and washers (5) from front gear housing (3). (3) Remove three bolts (6), washers (7), and front gear housing (3) from cylinder block (8). (4) Remove sealing compound from back of front gear housing (3). (5) Remove expansion shield (9) from front gear housing (3). (6) Remove idler gear (10) and bearing sleeve (11) from cylinder block (8). (7) Remove three bolts (12) and stub shaft (13) from cylinder block (8). 20-58 Change 1