TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 1039 of 1414
TM 9-2320-365-34-2 NOTE Replace any part that fails visual inspection or size measurement requirements. (3) Measure thickness of thrust plate (2). Minimum thickness is 0.182 in. (4.62 mm). NOTE If camshaft fails inspection, camshaft bearings and cam roller followers must also be replaced. (4) Inspect camshaft lobes (3) and journals (4) for pitting, cracks, corrosion, and evidence of overheating. (5) Inspect camshaft gear (5) for cracks and damaged or broken teeth. (6) Measure distance between camshaft shoulder (6) and camshaft gear (7). Minimum distance is 0.188 in. (4.78 mm). 20-53