TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 1026 of 1414

TM 9-2320-365-34-2 20-6. PISTON AND CONNECTING ROD ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine mounted on maintenance stand (para 20-2). Cylinder head removed (para 3-6). Oil pump removed (para 3-17). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Extractor, Screw (Item 19, Appendix B) Caliper, Micrometer, Inside (Item 6, Appendix B) Pliers, Retaining Ring (Item 38, Appendix B) Degreaser, Portable Liquid Type (Item 15, Appendix B) Compressor, Ring, Piston (Item 13, Appendix B) Goggles, Industrial (Item 25, Appendix B) Press, Arbor, Hand Operated (Item 41, Appendix B) Tools and Special Tools Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Materials/Parts Gage, Bearing Clearance (Item 34, Appendix C) Rag, Wiping (Item 59, Appendix C) Solvent, Dry Cleaning (Item 81, Appendix C) Lubricating Oil, Engine (Item 47, Appendix C) Carbon Removing Compound (Item 19, Appendix C) Personnel Required (2) a. Removal. NOTE All piston and connecting rod assemblies are removed the same way. One piston and connecting rod assembly shown. (1) Remove bolt (1) and cooling jet (2) from cylinder block (3). 20-40 Change 1