TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 98 of 1334
TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 2-30 2-30 2-30 2-30 2-30 1. NO YES START Vibration damper OK. Air cleaner OK. Engine oil level OK. Fuel system OK. Front end out of alignment OK. Loose or damaged engine mounts. Improper injector sychronization. NO YES Are all injectors set to the same reference point as No. 1 cylinder? Vibration damper OK. Air cleaner OK. Engine oil level OK. Fuel system OK. Engine mounts OK. Front end aligned. Improper injector synchronization. 2. Loose mounting hardware or damaged engine mounts will cause vibration. Fuel Injector Synchronization Engine will vibrate if injectors are not synchronized. KNOWN INFO POSSIBLE PROBLEMS WARNING Read WARNING on following page. TEST OPTIONS Visual inspection REASON FOR QUESTION KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION a5. TOO MUCH VIBRATION IN ENGINE INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Perform fuel injector synchronization (para 4-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Tool Kit, Intl Comb Eng (TM 9-2320-365-20) Wrench, Torque, 0-60 N·m (Item 84, Appendix B) Tighten loose mounting hardware. Replace engine front resilient mounts (para 3-4). Replace engine assembly (para 3-3). Are engine front resilient mounts secure and free from damage?