Sign up to sell your inventory with NSN Lookup

TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download

Page 931 of 1334

TM 9-2320-365-34-1 Change 1 2-836.1 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to transfer case connector pin B. (3) Connect negative (-) probe of multimeter to transfer case wiring harness connector socket B and note reading on multimeter. (4) If continuity is not present, replace transfer case wiring harness (para 8-2). (5) Connect positive (+) probe of multimeter to transfer case connector pin B. (6) Connect negative (-) probe of multimeter to all other pins in transfer case connector and note reading on multimeter. (7) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (8) If continuity is present, transfer case wiring harness is shorted; replace transfer case wiring harness (para 8-2).