TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 91 of 1334
TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 2-23 2-23 2-23 2-23 2-23 FUEL CONTROL LINKAGE TEST (1) Raise cab (TM 9-2320-365-10). (2) Remove valve cover (TM 9-2320-365-20-2). (3) Remove rocker arms (para 3-12). (4) Remove clip from fuel control linkage. (5) Slide sleeve, using soft jawed pliers, into cylinder head. (6) Remove retaining ring and clevis pin, using pin removal tool. (7) Check fuel control linkage for smooth operation. (8) If fuel control linkage still appears to be binding, remove fuel injectors (para 4-2). (9) With fuel injectors compressed, check fuel injector racks for smooth operation. (10) If fuel injector racks are sticky, fuel injector is faulty. (11) Check fuel control linkage for smooth operation. (12) If still binding, loosen four bolts holding fuel control linkage to cylinder head. (13) Operate fuel control linkage by hand. (14) Tighten two outer bolts in fuel control linkage to 30 lb-in. (3.5 N·m). (15) Tighten two inner bolts in fuel control linkage to 30 lb-in. (3.5 N·m). If fuel control linkage is still binding, replace fuel control linkage (para 4-7). (16) Install fuel injectors (para 4-2). (17) Install clevis pin and retaining ring using pin insertion tool. (18) Slide sleeve out of cylinder head and install clip. (19) Install rocker arms (para 3-12). (20) Install valve cover (TM 9-2320-365-20-2). (21) Lower cab (TM 9-2320-365-10).