TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download

Page 744 of 1334

TM 9-2320-365-34-1 INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-365-10). Batteries disconnected (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) STE/ICE-R (Item 60, Appendix B) Multimeter, Digital (Item 34, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P WARNING CAUTION Read WARNING and CAUTION on following page. KNOWN INFO Continuity Test or STE/ICE-R Test #91 TEST OPTIONS REASON FOR QUESTION 1. POSSIBLE PROBLEMS START YES Replace transmission external wiring harness (para 6-7). NO 2-650 Change 2 Faulty transmission external wiring harness. Faulty transmission adapter cable assembly. Faulty transmission internal wiring harness. Faulty C3 pressure switch. Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. WTEC III transmission ECU OK. Is continuity present from connector P119-h to connector P67-W? If continuity is not present, transmission external wiring harness is faulty. c54. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 32 AND/OR 57 AND ANY SUB CODE (PRIOR TO SERIAL NUMBER 6510032369 WITH TRANSMISSION ADAPTER CABLE ASSEMBLY)