TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 733 of 1334
RESISTANCE TEST Change 1 2-639 TM 9-2320-365-34-1 (1) Remove control valve module (para 7-10). (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to internal wiring harness 24-pin connector pin G2. (4) Connect negative (-) probe of multimeter to internal wiring harness 24-pin connector pin F3 and note reading on multimeter. (5) If resistance is less than 300 ohms or greater than 2000 ohms, replace transmission internal wiring harness (para 7-13). (6) Install control valve module (para 7-10).