TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 716 of 1334
KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION WARNING CAUTION Read WARNING and CAUTION on following page. START 1. INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Batteries disconnected (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) STE/ICE-R (Item 60, Appendix B) Multimeter, Digital (Item 34, Appendix B) Goggles, Industrial (Item 25, Appendix B) TM 9-2320-365-34-1 2-622 Change 1 Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty scavenge pump assembly. Faulty WTEC III transmission ECU. POSSIBLE PROBLEMS Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. Is continuity present from connector P119-a to connector P67-N? If continuity is not present, transmission external wiring harness is faulty. YES NO Replace transmission external wiring harness (para 6-7). Tools and Special Tools (Cont) Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Pan, Drain (Item 36, Appendix B) References TM 9-4910-571-12&P Personnel Required (2) c51. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 24 SUB CODE 12 OR 23 (SERIAL NUMBER 6510032369 AND HIGHER)