TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 286 of 1334
WARNING CAUTION Read WARNING and CAUTION on following page. START KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION 1. TM 9-2320-365-34-1 2-200 Change 1 POSSIBLE PROBLEMS If continuity is not present, transmission external wiring harness is faulty. Is continuity present from connector P119-B to external wiring harness 24-pin connector pin A2? Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty A solenoid. Faulty WTEC II TEPSS. Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. c13. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 41, 42, 44, 45, AND/OR 69 SUB CODE 12 (PRIOR TO SERIAL NUMBER 6510032369) Materials/Parts Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P Replace transmission external wiring harness (para 6-7). YES NO INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-365-10). Batteries disconnected (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) STE/ICE-R (Item 60, Appendix B) Multimeter, Digital (Item 34, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Wrench Set, Socket (Item 75, Appendix B)