TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 271 of 1334
Change 1 2-185 TM 9-2320-365-34-1 RESISTANCE TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to A solenoid connector pin A. (3) Connect negative (-) probe of multimeter to A solenoid connector pin B and note reading on multimeter. (4) If resistance is less than 2.5 ohms or more than 5.0 ohms, replace A solenoid (para 7-8). (5) If resistance is between 2.5-5.0 ohms, replace WTEC II TEPSS (TM 9-2320-365- 20-3). (6) Connect internal wiring harness connector A to A solenoid connector. (7) Install cover on control valve module with four screws. (8) Install control valve module (para 7-10). (9) Connect batteries (TM 9-2320-365-20-3).