TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 254 of 1334
WARNING CAUTION Read WARNING and CAUTION on following page. START KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION Replace transmission external wiring harness (para 6-7). YES 1. TM 9-2320-365-34-1 NO Is continuity present from connector P119-h to external wiring harness 24-pin connector pin F2? POSSIBLE PROBLEMS INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-365-10). Batteries disconnected (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) STE/ICE-R (Item 60, Appendix B) Multimeter, Digital (Item 34, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Materials/Parts Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P c10. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 32 AND/OR 57 AND ANY SUB CODE (PRIOR TO SERIAL NUMBER 6510032369) 2-168 Change 2 Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. WTEC II TEPSS OK. Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty C3 pressure switch. If continuity is not present, transmission external wiring harness is faulty.