TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 242 of 1334
WARNING CAUTION Read WARNING and CAUTION on following page. START KNOWN INFO Continuity Test or STE/ICE-R Test #91 TEST OPTIONS REASON FOR QUESTION YES Replace transmission external wiring harness (para 6-7). 1. TM 9-2320-365-34-1 NO POSSIBLE PROBLEMS Is continuity present from connector P119-h to external wiring harness 31-pin connector pin W? INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-365-10). Batteries disconnected (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) STE/ICE-R (Item 60, Appendix B) Multimeter, Digital (Item 34, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P 2-156 Change 2 c9. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 32 AND/OR 57 AND ANY SUB CODE (PRIOR TO SERIAL NUMBER 6510032369 WITH TRANSMISSION ADAPTER CABLE ASSEMBLY) Faulty transmission external wiring harness. Faulty transmission adapter cable assembly. Faulty transmission internal wiring harness. Faulty C3 pressure switch. Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. WTEC II TEPSS OK. If continuity is not present, transmission external wiring harness is faulty.