TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 234 of 1334
WARNING CAUTION Read WARNING and CAUTION on following page. KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION Replace transmission external wiring harness (para 6-7). YES 1. TM 9-2320-365-34-1 NO Is continuity present from connector P119-h to external wiring harness 31-pin connector pin W? If continuity is not present, transmission external wiring harness is faulty. POSSIBLE PROBLEMS INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-365-10). Batteries disconnected (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) STE/ICE-R (Item 60, Appendix B) Multimeter, Digital (Item 34, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Wire, Elect, 50 ft (Item 94, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P START c8. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 32 AND/OR 57 AND ANY SUB CODE (SERIAL NUMBER 6510032369 AND HIGHER) 2-148 Change 2 Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. WTEC II TEPSS OK. Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty C3 pressure switch.