TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 150 of 1334
TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 2-66 2-66 2-66 2-66 2-66 b1. ENGINE OVERHEATS START NO YES Is the fuel setting screw adjusted properly? Refer to para 4-4. 1. Incorrect fuel setting. Improperly timed injectors. Faulty cylinder head and/or engine block. Improperly timed injectors. Faulty cylinder head and/or engine block. Refer to para 4-5. Are injectors properly timed? YES NO Improperly timed injectors can cause engine to overheat. 2. KNOWN INFO POSSIBLE PROBLEMS WARNING Read WARNING on following page. TEST OPTIONS REASON FOR QUESTION Adjust fuel setting screw (para 4-4). KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION Adjust fuel timing (para 4-5). INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Engine oil level OK. Water temperature gage OK. Coolant level OK. Radiator core free of debris. Upper and lower radiator hoses OK. Radiator cap OK. Radiator overflow tank and hoses OK. Radiator OK. Fan shroud OK. Charge air cooler OK. Cylinder head and engine block OK. Improperly adjusted fuel setting screw can cause engine to overheat. Engine oil level OK. Water temperature gage OK. Coolant level OK. Radiator core free of debris. Upper and lower radiator hoses OK. Radiator cap OK. Radiator overflow tank and hoses OK. Radiator OK. Fan shroud OK. Charge air cooler OK. Fuel setting OK. Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Tool Kit, Intl Comb Eng (TM 9-2320-365-20) Wrench, Torque, 0-60 N·m (Item 84, Appendix B)