TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 147 of 1334
(1) Remove fuel shutoff solenoid (para 6-4). (2) Reconnect electrical leads to fuel shutoff solenoid (para 6-4). (3) Position master power switch to on (TM 9-2320-366-10-1). (4) If plunger in fuel shutoff solenoid does not fully contract, replace fuel shutoff solenoid (para 6-4). (5) Install valve cover (TM 9-2320-366-20-3). NOTE Perform steps (6) through (8) if plunger fully contracts. (6) Position master power switch to off (TM 9-2320-366-10-1). (7) Remove electrical leads from fuel shutoff solenoid (para 6-4). (8) Install fuel shutoff solenoid (para 6-4). (1) Remove clip from fuel control linkage. (2) Slide sleeve, using soft jawed pliers, into cylinder head. (3) Remove retaining ring and clevis pin, using pin removal tool. (4) Check fuel control linkage for smooth operation. (5) If fuel control linkage is binding, replace fuel control linkage (para 4-7). (6) If fuel control linkage moves freely, replace fuel governor (para 4-9). (7) Install valve cover (TM 9-2320-366-20-2). TM 9-2320-365-34-1 Change 1 2-64.15/(2-64.16 Blank)