TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 1137 of 1334
TM 9-2320-365-34-1 D-13. RELAY TEST WIRE Fabricate relay test wire according to the following information. Material Description National Stock Number Size Qty Wire, Electrical 6145-00-330-3318 6 in. (152.4 mm), 20 AWG 1 a. All dimensions are in inches (millimeters). b. Remove 3/4 in. (19.05 mm) insulation from each end of wire. D-14. SPANNER SOCKET TOOL Make the spanner socket tool from any 1/2 inch drive socket that is 2 1/2 inch OD and from 3/16 inch tool steel keystock according to the following instructions. Refer to the parts list and figure for details. Item Material Description Size Qty 1 Keystock, Tool Steel 3/16 in. X 1/8 in. X 2 in. long 4 2 Socket Wrench Socket 1/2 in. drive X 2 1/2 in. OD 1 Figure D-22. Spanner Socket Tool a. All dimensions are in inches. b. To surface of socket (2), weld 2 inch steel keystock (1) in 4 places as shown in Figure D-22. Spanner Socket Tool. Ensure keystock extends 1/2 inch beyond socket face. c. Remove sharp edges. D-27 D-27