TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 1135 of 1334
TM 9-2320-365-34-1 D-9. MACHINE GUN RING DRILL STOP Make the Machine Gun Ring Drill Stop from round aluminum stock and setscrew according to the following instructions. Refer to the parts list and figure for details. Item Part Number Material Description Size Qty 1 N/A Rod, aluminum 0.75 in. OD (19 mm) X 0.25 in. (6.3 mm) long 1 2 5305-00-404-8272 Setscrew 0.164 in. OD (4.1 mm) x 0.125 in. length (3.2 mm) 32 UNC 1 Figure D-20. Machine Gun Ring Drill Stop a. All dimensions are in in. (millimeters). b. Drill 0.393 in. (9.9 mm) diameter hole through as shown in Figure D-20. Machine Gun Ring Drill Stop. c. Drill 0.125 in (3.2 mm) diameter hole through for setscrew as shown in Figure D-20. Machine Gun Ring Drill Stop. d. Thread setscrew hole 0.164-32 UNC. e. De-burr and remove sharp edges. f. Insert setscrew (2) into Machine Gun Ring Drill Stop (1). D-10 MACHINE GUN RING WOODEN SUPPORT Cut from bulk wood stock according to the following information. a. Fabricate from MIL-STD 736 Group IV untreated bulk wood stock. b. Cut three (3) lengths of 2 X 4 inch stock 8 inches (203 mm) long. c. Sand and remove sharp edges. D-25 D-25