TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 1126 of 1334
TM 9-2320-365-34-1 D-5. CAB SUPPORT TOOL Make the cab support tool from 0.38 in. (9.6 mm) flat steel stock and angle iron stock according to the following instructions. Refer to the parts list and Figure D-11. Cab Support Tool Strut and Cab Rest for details. Item Part Number Material Description Size Qty 1 N/A Steel, Flat Bar 4.0 in. (102 mm) X 33.38 in. X (84.8 cm) X 0.38 in. (9.6 mm) 1 2 N/A Steel, Flat Bar 4.0 in. (102 mm) X 12.0 in. (305 mm) X 0.38 in. (9.6 mm) 1 3 N/A Angle Iron 2.0 in. (51 mm) X 2.0 in. (51 mm) X 3.5 in. (89 mm) 2 4 H.S.105VW-1 Omsi;gro[. CSA 105 C 5 IC 551 Coating, Compound, Plastisol NA 1 Figure D-11. Cab Support Tool Strut and Cab Rest a. All dimensions are in inches (millimeters). b. Cut cab support tool strut (1) from steel flat bar and bend to shape as shown in Figure D-11. Cab Support Tool Strut and Cab Rest. c. Cut cab support tool cab rest (2) from steel flat bar. d. De-burr and remove sharp edges. D-16 D-16