TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 1065 of 1334
TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 TM 9-2320-365-34-1 WARNING Disconnecting any hydraulic line or fitting without first dropping pressure to zero, may result in injury to personnel. Wear approved eye protection when performing pressure checks. Failure to comply may result in oil getting into your eyes. If oil contacts eyes, seek medical attention immediately. Fuel and oil are slippery and can cause falls. To avoid injury, wipe up spilled fuel or oil with rags. (1) Start engine (TM 9-2320-365-10). Allow engine to run until reaching normal operating temprature. (2) Engage PTO (TM 9-2320-365-10). (3) Increase engine rpm to 1250-1450 rpm (TM 9-2320-365-10). (4) Check hydraulic rotary pump for overheating with engine at normal operating temperature. (5) Decrease engine rpm to 750 rpm. (6) Disengage PTO (TM 9-2320-365-10). (7) Shut down engine (TM 9-2320-365-10). 2-965 2-965 2-965 2-965 2-965