TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 1053 of 1334
Change 1 2-957 TM 9-2320-365-34-1 PRESSURE TEST Sub Code Shift From - To 01 1-2 2-N-2 4-3 4-5 6-5 6-7 R-1 R-2 R-N-1 R-2 N3-N2 99 79 78 72 71 56 34 54 32 Table 2-4.5. C3 Pressure Switch (13) Install C3 pressure tap plug and remove drain pan. (14) Install front and rear propeller shafts (TM 9-2320-365-20-3). (1) Remove front and rear propeller shafts (TM 9-2320-365-20-3). (2) Place drain pan under pressure tap. (3) Remove C3 pressure tap plug. (4) Connect tube to boss adapter, hose, and pipe to tube adapter to C3 pressure tap. (5) Connect batteries (TM 9-2320-365-20-3). (6) Perform STE/ICE-R test #50 (TM 9-4910- 571-12&P). (7) Start engine (TM 9-2320-365-10). (8) With parking brake applied, make shift indicated by sub code, refer to Table 2-4.5. C3 Pressure Switch, and note reading on STE/ICE-R. (9) If STE/ICE-R indicates greater than 0 psi (0 kPa), replace C3 solenoid regulator valve (para 7-7). (10) If STE/CE-R indicates 0 psi (0 kPa), replace C3 pressure switch (para 7-8). (11) Shut down engine (TM 9-2320-365-10). (12) Remove pipe to tube adapter, hose, and tube to boss adapter from C3 pressure tap.