TM-9-2320-365-34-1 LMTV Direct Maintenance Manual M1078 Series - Volume 1 Download
Page 1040 of 1334
WARNING CAUTION Read WARNING and CAUTION on following page. KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION Replace transmission external wiring harness (para 6-7). YES 1. POSSIBLE PROBLEMS TM 9-2320-365-34-1 2-944 Change 1 NO START INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-365-10). Batteries disconnected (TM 9-2320-365-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) STE/ICE-R (Item 60, Appendix B) Multimeter, Digital (Item 34, Appendix B) Goggles, Industrial (Item 25, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Wrench Set, Socket (Item 75, Appendix B) Materials/Parts Wire, Elect, 50 ft (Item 94, Appendix C) Adapter, Straight, Pipe to Tube (Item 2.1, Appendix C) Adapter, Straight, Tube to Boss (Item 2.2, Appendix C) Hose Assembly, Nonmetallic (Item 41.1, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. WTEC III transmission ECU OK. Faulty transmission external wiring harness. Faulty transmission adapter cable assembly. Faulty transmission internal wiring harness. Faulty C3 solenoid regulator valve. Faulty C3 pressure switch. Is continuity present from connector P119-h to connector P67-W? If continuity is not present, transmission external wiring harness is faulty. c79. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 52 AND ANY SUB CODE (PRIOR TO SERIAL NUMBER 6510032369 WITH TRANSMISSION ADAPTER CABLE ASSEMBLY)