TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 91 of 666
TM 9-2320-365-20-5 Change 2 20-237 20-46. M1079 HEATER FUEL TUBES/HOSES REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). AC power disconnected (TM 9-2320-365-10). LH and RH doors opened (115 degrees) (TM 9-2320-365- 10). Spare tire lowered (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Sealant, Pipe, Teflon (Item 58, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Lockwasher (18) (Item 84, Appendix G) Lockwasher (3) (Item 83, Appendix G) Ties, Cable, Plastic (Item 76, Appendix D) a. Removal. (1) Disconnect connector P244 (1) from heater connector (2). (2) Disconnect connector P245A (3) from heater control unit (4). (3) Remove 18 screws (5), lockwashers (6), washers (7), heater deflector (8), and heater cover (9) from van body wall (10). Discard lockwashers. NOTE Tag connector and connection points prior to disconnecting.