TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 446 of 666
TM 9-2320-365-20-5 23-7. WET TANK REPLACEMENT (CONT) NOTE Perform step (11) on vehicles not previously equipped with corrosive enhanced clamps. (11) Position two clamps (7) on battery box (8). (12) Position wet tank (2) in two clamps (7) with self-locking nuts (9). (13) Tighten two self-locking nuts (9) to 4-5 lb-ft (5-7 N·m). (14) Connect connector P84 (10) to pressure switch (6). (15) Connect three air hoses (11) to wet tank (2). c. Follow-on Maintenance. (1) Install pressure protection valve (para 11-29). (2) Start engine (TM 9-2320-365-10). (3) Check air hoses and wet tank fittings for air leaks. (4) Shut down engine (TM 9-2320-365-10). End of Task. 23-34 Change 1