TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 425 of 666
TM 9-2320-365-20-5 23-6. AIR DRYER REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Air tanks drained (TM 9-2320-365-10). Batteries disconnected (para 7-48). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Wrench Set, Socket (Item 48, Appendix C) Purge Valve Tool (Item E-22, Appendix E) Hammer, Hand (Item 18, Appendix C) Materials/Parts Nut, Plain, Hex (Item 36, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Parts Kit, Dehydrator (Item 196, Appendix G) Nut, Self-Locking (4) (Item 149, Appendix G) Boot Kit, Exhaust (Item 3, Appendix G) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Personnel Required (2) a. Removal. WARNING • Air dryer may contain air pressure. Loosen input air hose connector slowly to vent off air pressure. Failure to comply may cause injury to personnel. • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. (1) Loosen input air hose nut (1). (2) Disconnect input air hose (2) from 90-degree fitting (3). (3) Disconnect outlet air hose (4) from 90-degree fitting (5). Change 1 23-15