TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 424 of 666
TM 9-2320-365-20-5 23-5. SHUTTLE VALVE REPLACEMENT (CONT) b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of adapter (1) and adapter (2). (2) Install shuttle valve (3) on adapter (1). (3) Install adapter (2) in shuttle valve (3). (4) Apply antiseize compound to threads of 90-degree fitting (4). (5) Install 90-degree fitting (4) on shuttle valve (3). (6) Connect air hose (5) to 90-degree fitting (4). c. Follow-On Maintenance. (1) Install inversion valve (para 23-4). (2) Start engine (TM 9-2320-365-10). (3) Check for air leaks around shuttle valve and inversion valve. (4) Shut down engine (TM 9-2320-365-10). End of Task. 23-14