TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 422 of 666
TM 9-2320-365-20-5 23-4. INVERSION VALVE REPLACEMENT (CONT) b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap or water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of two 90-degree fittings (1). (2) Install two 90-degree fittings (1) on inversion valve (2). (3) Install inversion valve (2) on fitting (3). (4) Connect two air hoses (4) to 90-degree fittings (1). c. Follow-On Maintenance. (1) Start engine (TM 9-2320-365-10). (2) Check for air leaks around inversion valve. (3) Shut down engine (TM 9-2320-365-10). End of Task. 23-12