TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 399 of 666
TM 9-2320-365-20-5 b. Installation. WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. NOTE Install center seat in folded and raised position with seat rails in the forward position. (1) Apply sealing compound to threads of two screws (1). (2) Position center seat (2) on platform (3). NOTE Flat sides of screw will be in line with seat tracks. (3) Position two washers (4) and screws (1) in seat mount (5). (4) Slide center seat (2) fully forward. (5) Fold center seat (2) down. (6) Position two washers (6) and screws (7) in seat mount (5). NOTE When tightening screws, flat sides of screws are to be in line with track sides. (7) Tighten two screws (1 and 7) to 14-18 lb-ft (19-24 N·m). End of Task. Change 1 21-9