Sign up to sell your inventory with NSN Lookup

TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download

Page 398 of 666

TM 9-2320-365-20-5 21-8.2 Change 2 21-5. MACHINE GUN RING CENTER SEAT REPLACEMENT (CONT) b. Installation. (1) Apply sealing compound to threads of two screws (1). (2) Position center seat (2) on platform (3). (3) Position two washers (4) and screws (1) in seat mount (5). (4) Position two spacers (5.1), washers (4), and screws (1) in seat mounts (5). (5) Slide center seat (2) fully forward. (6) Fold center seat (2) down. WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. NOTE • Flat sides of screw will be in line with seat tracks. • Perform step (3) on vehicles with cabs S/N 12075G or lower. NOTE • Perform step (2) on vehicles with cabs S/N 12075G or lower. Cab S/N located on B pillar. • Install center seat in folded and raised position with seat rails in the forward position. NOTE Perform step (4) on vehicles with cabs S/N 12076G or higher.