TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 391 of 666
TM 9-2320-365-20-5 (5) Remove machine gun ring (3) from cab roof (4). (6) Remove three wooden blocks from cab roof (4). (7) Remove 12 washers (5) and ring spacer (6) from cab roof (4). b. Installation. NOTE • Align ring spacer and washers with threaded holes in cab roof. • Ring spacer should have 1/4 in. (0.635 cm) clearance from inner lip of cab rood to allow free rotation of machine gun ring. (1) Position ring spacer (1) and 12 washers (2) on cab roof (3). WARNING Machine gun ring assembly weighs approximately 350 lbs (159 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (2) through (6) require the aid of an assistant. (2) Position three wooden blocks on cab roof (3). (3) Position machine gun ring (4) on cab roof on three wooden blocks. Change 1 21-3