TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 382 of 666
TM 9-2320-365-20-5 20-550 Change 2 20-92. DIGITIZATION KIT CO-DRIVER’S SEAT REPLACEMENT/REPAIR c. Assembly. (1) Position plastic film (24) over seat back (16). (2) Position seat back cover (23) over plastic film (24) and seat back (16). (3) Pull seat back cover (23) tight over seat back (16) and install five hog rings (22) equally spaced on seat back cover (23). (4) Position seat bottom cover (21) on seat bottom (13). (5) Pull seat bottom cover (21) tight over seat bottom (13) and install 10 hog rings (20) on seat bottom cover (21). WARNING CAUTION NOTE Plastic film is provided in replacement seat cover kit. Wear appropriate eye protection when installing spring rings. Spring rings are under tension and can act as projectiles when being removed. Failure to comply may result in injury to personnel. Ensure hog rings are crimped over support wires on bottom of seat back. Failure to comply may result in damage to equipment.