TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 347 of 666
TM 9-2320-365-20-5 Change 2 20-515 20-88. DIGITIZATION KIT POWER CABLE REMOVAL/INSTALLATION This task covers: a. Removal b. installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10-1) Batteries discounted (TM 9-2320-365-20-3) Kick panel removed (TM 9-2320-365-20-4) Power Distribution Panel removed for access (TM 9-2320-365-20-3) Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Tool Kit Electrical Contact Repair (Item 44.1 Appendix C) Materials/Parts Lockwasher (2) (Item 103.1Appendix G) Ties, Cable, Plastic (Item 76, Appendix D) Washer, Spring (6) (Item 283, Appendix G) Dispenser Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Terminal Lug (Item 269.01, Appendix G) Nut, Self-Locking (Item 132.1, Appendix G) Personnel Required (2) a. Removal. (1) Remove nut (1), lockwasher (2), washer (3), and terminal lug TL21 (4) from ground stud (5). Discard lockwasher. (2) Disconnect terminal lug TL14 (6) from terminal block TB2 connector 5 (7). NOTE • Perform steps (1) through (4) on vehicle serial numbers 00001 through 11437. • Tag connectors and connection points prior to disconnecting.