TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 341 of 666
TM 9-2320-365-20-5 Change 2 20-509 (57) Remove terminal lug TL22 ring terminal (90) from NEW digitization power cable and strip insulation 5/16 in (8 mm). (58) Install terminal lug TL22 spade terminal (91) on NEW digitization power cable. (59) Remove terminal lug TL22, ring terminal (90) from NEW digitization power cable and strip insulation 5/16 in (8 mm). (60) Install terminal lug TL22, spade terminal (91) on NEW digitization power cable and wire 146. NOTE • Perform steps (57) through (60) if a new digitization power cable is being installed. • Perform steps (57) and (58) if replacing the digitization power cable on vehicle serial numbers 00001 through 11347 equipped with WTEC II controller. NOTE Perform steps (59) and (60) if replaicng the digitization power cable on vehicle serial numbers 00001 through 11347 equipped with WTEC III controller.