TM-9-2320-365-20-5 LMTV Unit Maintenance Manual M1078 Series - Volume 5 Download
Page 332 of 666
TM 9-2320-365-20-5 20-500 Change 2 20-86. DIGITIZATION KIT INSTALLATION This task covers: a. Installation b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10) Batteries discounted (para 7-48) Power distribution panel removed (para 7-10 WTEC II, para 7-11 WTEC III) Kick panel removed (para 16-3) RH seat removed (para 16-14) Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque (0-200 Lb-in) (Item 58, Appendix C) Wrench Set, Socket (Item 49, Appendix C) Materials/Parts Plastic Cable Ties (Item 76, Appendix D) Sealant (Item 68.2 Appendix D) Personnel Required (2) a. Installation. (1) Position drivers storage box (1) in cab. (2) Apply sealant to threads of six screws (2). (3) Position six washers (3) and screws (2) in drivers storage box (1). (4) Tighten six screws (2) to 70-85 lb-in. (8-10 N•m). (5) Snap webbing (4). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.